Product Introduction
The iES-ICS62600 high-power all-in-one DC charging unit is purpose-built to meet high-rate charging demands for special-purpose vehicles, including heavy-duty lorries, mine haulers and construction-site machinery. Widely installed at urban public fast-charging hubs and ultra-rapid charging networks along highways, it delivers stable, non-stop high-power charging for heavy trucks, mining vehicles, engineering machines, ships and other specialized equipment.
This charger adopts an all-in-one layout with peak system power reaching 600 kW. Its core assemblies cover high-efficiency charging modules, smart power-control units, power switching components, charging management modules, 4G wireless communication hardware, high-accuracy energy meters, a 7-inch HMI touch-screen, CCS2-compliant charging plugs, and an IP55-rated outdoor cabinet for field-deployed operation.
Product Features
- All-in-one compact central-control structure supports rapid site rollout. This 600kW unit enables simultaneous charging for multiple EVs and delivers high-power charging for heavy-duty commercial trucks.
- Outstanding energy-saving and high-efficiency design: weighted system efficiency reaches ≥96.5%, meeting Class 1 energy-saving standards. Each charger can save over 4,000 RMB in power costs every year.
- 108 proactive safety control points: establishes deep real-time communication with vehicle BMS, supports flexible power distribution and full battery status monitoring. Safety protection shifts from passive alerts to active risk prevention.
- Broad scenario compatibility: DC output voltage covers 200–1000V, with constant-power region ranging from 300V to 1000V. Compatible with passenger EVs and heavy-duty trucks.
- AI-enabled intelligent O&M: integrated AI self-diagnosis plus remote OTA updates support fault prediction and off-site troubleshooting, greatly improving operational maintenance efficiency.
- Full set of electrical safety protections: real-time risk monitoring and immediate power cut for overvoltage, undervoltage, overload, short circuit, leakage, overheating and surge current. It also features emergency stop and cabinet door power-off interlock.
Technical Specifications
| Basic Data | Product Name | High‑Power Integrated DC Charger | |||||
| Models | iES‑ICS62240E | iES‑ICS62320E | iES‑ICS62360E | iES‑ICS62400E | iES‑ICS62480E | iES‑ICS62 600E | |
| Rated Power | 240 kW | 320 kW | 360 kW | 400 kW | 480 kW | 600 kW | |
| Housing Material | High‑Strength Galvanized Sheet, Anti‑corrosion and Rust‑proof | ||||||
| Structural Type | Integrated | ||||||
| Dimensions (cm) | 85*88*190 | ||||||
| Connection Method | Connection Method C, Charging Mode 4 | ||||||
| Charging Gun | CCS2 ×1 / ×2; Optional: CCS2 ×1 + GB/T ×1; Optional: GB/T ×1 / ×2 | ||||||
| Electrical Specifications | Input Voltage / Frequency | AC 400 V ± 15%/50 ± 1Hz | |||||
| Output Voltage | DC 200 ~ 1000 V | ||||||
| Constant Power Range | DC 300 ~ 1000 V | ||||||
| Max. Output Current (Dual Guns) | MAX 800 A | ||||||
| Auxiliary Power Supply | 12 V ± 5% | ||||||
| Voltage Regulation Accuracy | ≤ ± 0.5% | ||||||
| Current Regulation Accuracy | ≤ ± 1% | ||||||
| Voltage Ripple Factor | Peak ≤ 0.5 | ||||||
| Accuracy Class | Level 1.0 | ||||||
| Standby Power Consumption (Whole Unit) | ≤ 30W | ||||||
| Input Power Factor | ≥ 0.99 | ||||||
| Noise | ≤ 65 dB | ||||||
| Mean Time Between Failures (MTBF) | ≥ 500000 h | ||||||
| Insulation / Dielectric Strength | 2200 V AC / 50 Hz 10 mA, 1 Minute Without Breakdown | ||||||
| Efficiency | First‑Level Energy Efficiency / Second‑Level Energy Efficiency (Optional) | ||||||
| Environmental Specifications | Operating Temperature | ‑25℃ ~ 65℃, It Should Be Used At a Reduced Capacity Above 50℃. | |||||
| Operating Humidity | 5% ~ 95% RH | ||||||
| Operating Altitude | ≤ 2000 m, For Distances Over 2000 Meters, The Usage Must be Reduced. | ||||||
| Protection Level | IP55 | ||||||
| Cooling Method | Intelligent Forced Air Cooling | ||||||
| Storage Temperature | ‑40℃ ~ 70℃ | ||||||
| Safety Protection | Input Protection | Input Overvoltage/Undervoltage Protection | |||||
| Output Protection | Output Overload/Short Circuit Protection | ||||||
| Equipment Safety Protection | Electrical Leakage, Grounding, Environmental Over‑temperature, Lightning Protection, Door Opening Power‑off Protection | ||||||
| Charging Process Protection | Emergency Stop, Insulation Detection, Gun Head Locking, Gun Head Over‑temperature Protection | ||||||
| Human‑Machine Interaction | Status Display | LED Three‑color Indicator Light | |||||
| LCD Screen | 7‑inch Color LCD Screen (Optional) | ||||||
| Communication Interface | 4G / 5G, Ethernet | ||||||
| Start Method | Swiping RFID Card, Scanning QR Code | ||||||
| Smart / Intelligent Functions | Automatic Power Distribution, OTA Upgrade, Charging Reservation, Scheduled Charging | ||||||
Certificates
Our Company
Shandong Jicheng Zhitong New Energy belongs to a listed parent enterprise with stock code 002339 and more than 40 years of power industry experience. Our IESLab brand has won recognition as one of China’s top EV charging brands. We launched independent EV charger R&D in 2017, creating this 600kW CCS2 OCPP heavy-duty DC charger for truck fleets. Our product portfolio includes AC wall chargers, high-power DC fast chargers and liquid-cooled ultra-fast charging systems. We provide full-lifecycle product tracking and dedicated technical support for fleet operators. This ultra-high-power charger realizes rapid energy replenishment for electric heavy trucks. The OCPP protocol supports remote management and real-time charging data monitoring.
