Product Introduction
The IES-ICS62360E high-power DC charger is purpose engineered to cut charging downtime for heavy trucks, mine haulers and engineering machinery. It is commonly deployed at public fast charging hubs and cross-country highway ultra-fast charging networks, delivering steady continuous high-power charging for heavy commercial vehicles and various on-site special equipment.
Featuring an integrated compact layout with peak power up to 360kW, the unit integrates high-efficiency charging modules, intelligent power control assemblies, power switch parts, charging management system, 4G wireless hardware, accurate energy metering device, 7-inch HMI touch panel, CCS2 charging plugs and IP55 outdoor cabinet for field installation.
Product Features
- Central-controlled All-in-one Compact Framework: Simplifies rapid on-site deployment. Multi-vehicle simultaneous charging capability addresses high-power charging requirements for heavy-duty trucks.
- Superior Energy Efficiency: The high-efficiency model hits weighted system efficiency ≥96.5% and fulfils Class 1 energy-saving criteria. Each charger can cut annual electricity bills by more than 4,000 RMB.
- 108-item Proactive Safety Control Suite: Real-time deep BMS communication, flexible power scheduling and full battery status surveillance. Safety protection upgrades from passive alerting to active risk avoidance.
- Wide Voltage & Vehicle Compatibility: DC output spans 200–1000V, constant-power segment from 300–1000V. Works seamlessly across passenger cars up to heavy-load trucks.
- AI Powered Smart O&M System: Native AI self-diagnosis and remote OTA upgrades deliver fault prediction and off-site fault resolution, substantially improving maintenance productivity.
- Full-spectrum Electrical Safety Mechanism: Real-time hazard detection and immediate cutoff triggered by overvoltage, undervoltage, overload, short circuit, leakage, overheat and surge. Emergency stop and cabinet door power interlock are equipped.
Technical Specifications
| Basic Data | Product Name | High‑Power Integrated DC Charger | |||||
| Models | iES‑ICS62240E | iES‑ICS62320E | iES‑ICS62360E | iES‑ICS62400E | iES‑ICS62480E | iES‑ICS62600E | |
| Rated Power | 240 kW | 320 kW | 360 kW | 400 kW | 480 kW | 600 kW | |
| Housing Material | High‑Strength Galvanized Sheet, Anti‑corrosion and Rust‑proof | ||||||
| Structural Type | Integrated | ||||||
| Dimensions (cm) | 85*88*190 | ||||||
| Connection Method | Connection Method C, Charging Mode 4 | ||||||
| Charging Gun | CCS2 ×1 / ×2; Optional: CCS2 ×1 + GB/T ×1; Optional: GB/T ×1 / ×2 | ||||||
| Electrical Specifications | Input Voltage / Frequency | AC 400 V ± 15%/50 ± 1Hz | |||||
| Output Voltage | DC 200 ~ 1000 V | ||||||
| Constant Power Range | DC 300 ~ 1000 V | ||||||
| Max. Output Current (Dual Guns) | MAX 800 A | ||||||
| Auxiliary Power Supply | 12 V ± 5% | ||||||
| Voltage Regulation Accuracy | ≤ ± 0.5% | ||||||
| Current Regulation Accuracy | ≤ ± 1% | ||||||
| Voltage Ripple Factor | Peak ≤ 0.5 | ||||||
| Accuracy Class | Level 1.0 | ||||||
| Standby Power Consumption (Whole Unit) | ≤ 30W | ||||||
| Input Power Factor | ≥ 0.99 | ||||||
| Noise | ≤ 65 dB | ||||||
| Mean Time Between Failures (MTBF) | ≥ 500000 h | ||||||
| Insulation / Dielectric Strength | 2200 V AC / 50 Hz 10 mA, 1 Minute Without Breakdown | ||||||
| Efficiency | First‑Level Energy Efficiency / Second‑Level Energy Efficiency (Optional) | ||||||
| Environmental Specifications | Operating Temperature | ‑25℃ ~ 65℃, It Should Be Used At a Reduced Capacity Above 50℃. | |||||
| Operating Humidity | 5% ~ 95% RH | ||||||
| Operating Altitude | ≤ 2000 m, For Distances Over 2000 Meters, The Usage Must be Reduced. | ||||||
| Protection Level | IP55 | ||||||
| Cooling Method | Intelligent Forced Air Cooling | ||||||
| Storage Temperature | ‑40℃ ~ 70℃ | ||||||
| Safety Protection | Input Protection | Input Overvoltage/Undervoltage Protection | |||||
| Output Protection | Output Overload/Short Circuit Protection | ||||||
| Equipment Safety Protection | Electrical Leakage, Grounding, Environmental Over‑temperature, Lightning Protection, Door Opening Power‑off Protection | ||||||
| Charging Process Protection | Emergency Stop, Insulation Detection, Gun Head Locking, Gun Head Over‑temperature Protection | ||||||
| Human‑Machine Interaction | Status Display | LED Three‑color Indicator Light | |||||
| LCD Screen | 7‑inch Color LCD Screen (Optional) | ||||||
| Communication Interface | 4G / 5G, Ethernet | ||||||
| Start Method | Swiping RFID Card, Scanning QR Code | ||||||
| Smart / Intelligent Functions | Automatic Power Distribution, OTA Upgrade, Charging Reservation, Scheduled Charging | ||||||
Certificates
Our firm, with decades of power industry practice, complies with ISO 9001 Quality, ISO 14001 Environmental, ISO 45001 Occupational Health & Safety, and ISO 27001 Information Security management systems.
Complete technical dossiers can be provided. We accept prototype customisation requests and assist customers with full local-market certification submissions.
Our Company
Our listed parent enterprise holds stock code 002339 and has accumulated more than 40 years of power industry experience. IESLab Jicheng Zhitong focuses on high-power heavy-duty EV charging infrastructure as a national high-tech enterprise. Starting from 2017, we independently develop charging hardware including this 360kW CCS2 DC fast charger for heavy trucks. Our full product range includes AC wall chargers, public DC fast piles and liquid-cooled ultra-fast charging systems. We provide full-lifecycle product tracking and dedicated technical support for fleet and truck operators. This heavy-duty charger supports fast energy replenishment for electric trucks and large commercial vehicles. Our R&D team improves thermal management for long-time high-power charging.
