Product Introduction
Our iES-ICS62240INA customizable 240kW CCS2 dual-gun all-in-one DC charger is designed to handle continuous commercial charging workloads. It works perfectly for public charging points, highway rest zones, commercial parking lots and roadside charging facilities, delivering dependable power supply for passenger cars and commercial EV fleets.
Built with rugged all-in-one mechanical design, this charger supports flexible power adjustment. The core hardware includes high-efficiency charging modules, smart power controllers, power switching components and OCPP-ready charge management modules. It is equipped with 4G communication hardware, high-accuracy energy meters, a 7-inch HMI touch display and CCS2 connectors. The IP55 outdoor enclosure ensures stable performance in harsh outdoor environments. Clients may customize cabinet appearance, logo and HMI interface to meet unique project requirements.
Product Features
- Energy Saving & High Efficiency: The high-efficiency design delivers weighted system efficiency ≥96.5%, complying with Class 1 energy-saving standards.
- 108-Point Proactive Safety Control: It maintains real-time deep communication with vehicle BMS, implements flexible power distribution and full battery status monitoring. The protection mechanism shifts from passive alerts to active hazard prevention.
- Broad Scenario Compatibility: DC output ranges from 200V to 1000V, with constant-power region covering 300–1000V. It works for vehicles from passenger EVs to medium-load heavy trucks.
- AI-Enabled Smart O&M: Built-in AI self-inspection plus remote OTA firmware updates enable fault prediction and off-site troubleshooting, greatly lifting O&M efficiency.
- Full Electrical Safety Protection: Real-time risk monitoring and instant cut-off for overvoltage, undervoltage, overload, short circuit, leakage and overheating. Emergency stop and power interlock will activate once cabinet doors open.
Technical Specifications
| Basic Data | Product Name | High‑Power Integrated DC Charger | |||||
| Models | iES‑ICS62120 | iES‑ICS62240 | iES‑ICS62360 | iES‑ICS62400 | iES‑ICS62480 | iES‑ICS62600 | |
| Rated Power | 120 kW | 240 kW | 360 kW | 400 kW | 480 kW | 600 kW | |
| Housing Material | High‑Strength Galvanized Sheet, Anti‑corrosion and Rust‑proof | ||||||
| Structural Type | Integrated | ||||||
| Dimensions (cm) | 85*88*190 | ||||||
| Connection Method | Connection Method C, Charging Mode 4 | ||||||
| Charging Gun | CCS2 ×2 Optional: CCS2 ×1 + GB/T ×1 Optional: GB/T ×2 | ||||||
| Electrical Specifications | Input Voltage / Frequency | AC 400 V ± 15%/50 ± 1Hz | |||||
| Output Voltage | DC 200 ~ 1000 V | ||||||
| Constant Power Range | DC 300 ~ 1000 V | ||||||
| Max. Output Current (Dual Guns) | MAX 800 A | ||||||
| Auxiliary Power Supply | 12 V ± 5% | ||||||
| Voltage Regulation Accuracy | ≤ ± 0.5% | ||||||
| Current Regulation Accuracy | ≤ ± 1% | ||||||
| Voltage Ripple Factor | Peak ≤ 0.5 | ||||||
| Accuracy Class | Level 1.0 | ||||||
| Standby Power Consumption (Whole Unit) | ≤ 30W | ||||||
| Input Power Factor | ≥ 0.99 | ||||||
| Noise | ≤ 65 dB | ||||||
| Mean Time Between Failures (MTBF) | ≥ 500000 h | ||||||
| Insulation / Dielectric Strength | 2200 V AC / 50 Hz 10 mA, 1 Minute Without Breakdown | ||||||
| Efficiency | First‑Level Energy Efficiency / Second‑Level Energy Efficiency (Optional) | ||||||
| Environmental Specifications | Operating Temperature | ‑25℃ ~ 65℃, It Should Be Used At a Reduced Capacity Above 50℃. | |||||
| Operating Humidity | 5% ~ 95% RH | ||||||
| Operating Altitude | ≤ 2000 m, For Distances Over 2000 Meters, The Usage Must be Reduced. | ||||||
| Protection Level | IP55 | ||||||
| Cooling Method | Intelligent Forced Air Cooling | ||||||
| Storage Temperature | ‑40℃ ~ 70℃ | ||||||
| Safety Protection | Input Protection | Input Overvoltage/Undervoltage Protection | |||||
| Output Protection | Output Overload/Short Circuit Protection | ||||||
| Equipment Safety Protection | Electrical Leakage, Grounding, Environmental Over‑temperature, Lightning Protection, Door Opening Power‑off Protection | ||||||
| Charging Process Protection | Emergency Stop, Insulation Detection, Gun Head Locking, Gun Head Over‑temperature Protection | ||||||
| Human‑Machine Interaction | Status Display | LED Three‑color Indicator Light | |||||
| LCD Screen | 7‑inch Color LCD Screen (Optional) | ||||||
| Communication Interface | 4G / 5G, Ethernet | ||||||
| Start Method | Swiping RFID Card, Scanning QR Code | ||||||
| Smart / Intelligent Functions | Automatic Power Distribution, OTA Upgrade, Charging Reservation, Scheduled Charging | ||||||
Certificates
Project Cases
All product lines support remote diagnosis and O&M services. Compatible with diverse vehicle fleets, our solutions effectively boost operational efficiency for charging sites. To date, Jicheng Zhitong has delivered numerous DC Chargers to Europe, Indonesia and the Central‑Eurasia region. Backed by dedicated service teams and sufficient spare‑part inventories, we keep supplying reliable “Jicheng‑made” charging equipment to overseas clients.
